- PLASMA CUTTERS
- WELDING CARTS
- WELDING MASKS
- WELDING TORCHES
- GAS EQUIPMENT
- WELDING ACCESSORIES
- SPARE PARTS
- HEALTH AND SAFETY
- ABRASIVE MATERIALS
- CORDLESS TOOLS
- Weld bead cleaners
- WELDING GAUGES
Cylinder filled with Argon / CO2 mixture with 200bar pressure reducer.
Hot-Air Soldering Station + Set of 3 nozzles
SOLDERING STATION HOT-AIR TECHREBAL 858D + Set of 3 nozzles
Hot air soldering iron with a power of 700W. The device is characterized by a compact housing that takes up little space, the station has an adjustable temperature from 100 ° C to 500 ° C and a blowing power. It is the only station of this type available on the market that can be calibrated quickly! (Instructions under the description)
The flask in the device is detachable, precise temperature setting with the actual temperature on the display, and air flow regulation.
The station is ideal for service repairs and as a plastic welder.
The powerful heater instantly heats up to the desired temperature. In addition, the stations are driven by a fan built into the woman, which is practically noiseless and does not cause vibrations, which is very comfortable during work. A fan with a brushless motor - enhanced durability and quiet operation. The 858D is equipped with a flexible stock hose, which increases mobility and comfort of work. The station is equipped with a put-away sensor - in the event that a flask of hot air is put on the handle, it automatically cools down to 100 ° C, and then goes into standby mode (the heater is turned off). It is a solution that extends the life of the heating element. When the stock is removed from the holder, it returns to the previous settings and heats up to the set temperature.
- hot air station
- the hotair flask automatically cools down the heating element after switching off the station
- In addition, the station is very light (the station itself weighs about 870g!), Which is an advantage when transporting the device
- The stock is made in the ESD Safe technology
- Blowing with a fan
- Quick calibration possible
- A large number of nozzles available
- 700W hot air soldering station with powerful heating element
- LED display showing temperature at the flask outlet
- Temperature range from 100 ° C to 500 ° C
- Robust, very durable compact housing
- The station takes up little work space
- Length: 15 cm
- Width: 10 cm
- Height: 13.8 cm
- TECHREBAL 858D soldering station
- 3 interchangeable nozzles:
- round 5 mm
- round 8 mm
- round 10mm
- Power cord
The device has the ability to quickly calibrate the temperature:
1. While turning the device on (power switch), hold down the temperature reduction button at the same time.
2. The station will enter the calibration mode.
3. With the buttons for temperature control you can decrease or increase the temperature by 100 ° C
3 To confirm the change and end the calibration, set the temperature shown by the meter, and the station will return to normal operation after a while
Catalog number BY1015RPM Power supply [V] AC 230 50Hz Rotating motor power [W] 15 Load-bearing capacity at horizontal table positioning [kg] 10 Load capacity at maximum table inclination [kg] 5 Center of gravity [mm] --- Eccentricity [mm] --- Table diameter [mm] 180 Table inclination adjustment range [°] 0 - 90 Table speed adjustment range [rev / min] 2...