All best sellers
  • New

Sherman DIGIMIG 300 Pulse

VAT included

The synergistic DIGIMIG 300 Pulse welder is an innovative device for manual welding of steel and non-ferrous metals using the MIG / MAG, MMA (coated electrode) and Lift TIG methods. It can also be used for braze welding of thin (up to 3 mm) galvanized sheets. The welder allows you to connect a Spool Gun (SG).

Digital control allows for full adjustment of parameters, arc dynamics, characteristics and manual or synergic operating mode in the MIG / MAG method. The use of synergic settings in the welder for ordinary steel, stainless steel and aluminum alloys significantly simplifies its operation and allows it to be used by people with less experience and hobbyists. The use of a pulse or double pulse allows for a better quality of the weld, high aesthetics with very high efficiency.

The device can be welded using the standard MMA or MMA method with pulsation, which allows for a higher quality of the weld. In MMA you can adjust ARC FORCE, HOT START and turn off VRD.

DIGIMIG 300 Pulse enables TIG welding with DC pulsation along with pulse characteristics regulation. The welder allows the use of several operating modes including the option of spot welding. The device has the memory of the last setting, i.e. after turning it off and on again, the last set parameters are restored. It is also possible to save 35 sets of settings with easy access to program save / restore mode. On the inside of the spool chamber cover there is a shortened guide for the welder, which facilitates the current operation of the device, with a detailed description of access to the adjustable parameters.

The welder is equipped with a unique MIG torch with a knob in the handle that allows for remote voltage / current adjustment during operation in synergic mode.

The practical hanger for the MIG torch on the housing of the device facilitates the organization of the workplace and storage of the welding machine.

Additional Al rollers and a Teflon insert in the standard equipment make the device fully ready for aluminum welding without the need for additional accessories.


  • Supply voltage [V]: AC 3x400 50Hz
  • Welding methods: MIG, MMA, Lift TIG, braze welding
  • Manufacturing technology: IGBT
  • Welding current [A]: MIG: 300 MMA: 280 TIG: 280
  • Duty cycle [%]: MIG: 45 MMA: 50 TIG: 60
  • Max. current consumption [A]: 18 (MIG) / 17 (MMA) / 11.5 (TIG)
  • Max. power consumption [kVA]: MIG: 10 MMA: 8.8 TIG: 5.8
  • Welding current control: Smooth
  • Wed spool with wire [mm]: 200, 300
  • Speed wire feed [m / min]: 2 - 14
  • Weight [kg]: 43
  • Dimensions (L x W x H) [mm]: 935 x 402 x 775


  • Digital control,
  • Arc Force,
  • Hot Start,
  • 2T / 4T,
  • TIG Lift,
  • Rising current,
  • Current drop,
  • Inductance regulation,
  • Pulse,
  • Adjustable gas pre-flow and post-flow time,
  • Welding without gas,
  • 4-roll feeder,
  • Spool Gun option,
  • Settings memory,
  • Manual MIG,
  • Synergic MIG,
  • TIG Lift,
  • TIG Lift Pulse,
  • Welding without gas
Product Details

Write your review

ESAB OK GoldRox 1kg 6013

ESAB OK GoldRox 1kg 6013

Write your review
8 other products in the same category:

Reference: 104 301


Weldman MIG TEC 200 LCD SYNERGY Inverter welder

Review(s): 0

Code 104 301 The device type MIGTEC MIG 200 LCD Power supply [V] 230 Inert voltage [V] 45 Welding current adjustment range [A] MIG 10-200 TIG DC 10-200 MMA 10-200 Maximum efficiency at 40 ° C EN 60974-1 200A @ 25% 130A @ 100% Wire diameter [mm] 0.6-1.2 Protection class [IP] 23 Dimensions [cm] 46x23x43 Weight [kg] 15,5

Price €539.00
In stock

Reference: SINW-MIG261M


Sherman MIG 261M/4R Inverter welder

Review(s): 0

Catalog number SINW-MIG261M AC voltage 3x400 50Hz or AC 230 50Hz Welding methods - MIG, MMA IGBT technology Welding current 250A 60% duty cycle Max. power consumption 12.8 A Max. 9.4 kVA power consumption Smooth welding current regulation Avg. reel with wire 200, 300 mm Rev.. wire feed 3 - 18 m / min Weight 59 kg Dimensions 930 x 435 x 695 mm

Price €949.00
In stock

Reference: GRAFMIG220


Welder Fantasy 3 in 1 GRAFMIG 220 180A

Review(s): 0

Supply voltage [V] 1 ~ 230 Current frequency [Hz] 50/60 Power fluctuation tolerance [%] 10 Delayed protection min. [A] 16 Insulation class F IP21S housing protection grade Dimensions [mm] 460x240x350 Weight [kg] 18

Price €369.00
There are not enough products in stock

Follow us on Facebook