- PLASMA CUTTERS
- WELDING CARTS
- WELDING MASKS
- WELDING TORCHES
- GAS EQUIPMENT
- WELDING ACCESSORIES
- SPARE PARTS
- HEALTH AND SAFETY
- ABRASIVE MATERIALS
Sherman Speedy 200 MMA Welding set no 5
SHERMAN® HOBBY MMA 200 SPEEDY - WELDING SET # 5
Brand: SHERMAN | Welding methods: MMA, TIG LIFT | Power supply: 230V | Welding current: 200A | Efficiency: 60% |
- Sherman MMA Speedy 200 welder
- Mass holder - 2m
- Electrode holder - 2m
- User manual
- Warranty Card
- Transport case
- Welding shield
- TIG parts - 36 elements
- TIG LIFT 17V welding torch
MMA 200 Speedy welding rectifier is used for manual direct current welding of structural steels with coated electrodes (MMA method).
It is an inverter device, manufactured from the most technologically advanced components made in the IGBT technology.
The welder is equipped with automatic HOT START functions to facilitate ignition and ANTI STICK to facilitate detachment of the electrode in the event of sticking and protecting against damage to the device.
The welder is used in closed or roofed rooms, not exposed to direct weather conditions. It is intended for casual and amateur work.
- Supply voltage [V]: AC 230 50Hz
- Welding methods: MMA
- Manufacturing technology: IGBT
- Welding current [A]: 200
- Duty cycle [%]: 60
- Tension without load. [V]: 60
- Max. current consumption [A]: 32
- Max. power consumption [kVA]: 5.3
- Welding current control: Smooth
- Weight [kg]: 5.8
- Dimensions (L x W x H) [mm]: 320 x 125 x 200
- Functions: Hot Start, Anti-Stick
The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation, a 4-minute break is required. 100% duty cycle means that the device can work continuously without interruption.
LEVEL OF SECURITY
The IP defines the degree to which the device is resistant to solid and water contamination penetration. IP21S means that the device is suitable for operation in confined spaces and is not suitable for use in rain and snow.
HOT START FUNCTION
The HOT START function is commonly known as hot start. It works when the arc is struck, causing the welding current to temporarily increase above the value set by the welder. HOT START is designed to prevent the electrode from sticking to the material and is a great help when starting the arc.
ANTI STICK FUNCTION
The ANTI STICK function is a short-circuit protection that reduces the welding current when the electrode sticks to the workpiece. This makes it easier to detach and protects the device against damage.
TIG LIFT WELDING
The Sherman MMA Speedy 200 welder has the option of TIG welding - arc ignition by rubbing.
For welding with this method it is necessary to use an additional TIG torch with a 10-25 connection.
A gas cooled torch with 200A amperage and a shielding gas control valve is required.