All best sellers
  • Pack

Sherman MMA 200 - set no.3

SET3-SINW-MMA200
SHERMAN
Rating 
Description

SHERMAN® WORKSHOP MMA 200 -  WELDING KIT # 3

Brand : SHERMAN Welding methods: MMA, TIG LIFT Power supply: 230V Welding current: 190A Efficiency: 60% |

STANDARD EQUIPMENT

  • Sherman MMA 200 welder
  • Mass holder 2m
  • 3m electrode holder
  • User manual
  • Warranty Card

ADDITIONAL EQUIPMENT

  • Vogelmann Stark welding helmet
  • Large welding angle 37.5 kg
  • ESAB Heavy duty welding gloves
  • Welding hammer

The MMA 200 welding rectifier is used for manual DC welding of structural steels

It also enables TIG welding with arc ignition by rubbing (after using an additional handle).

It is an inverter device, manufactured from the most technologically advanced components made in the MOSFET technology .

The welder is equipped with automatic HOT START functions to facilitate ignition and ANTI STICK to prevent damage to the device.

The device also has an optional VRD function that lowers the voltage in no-load condition and minimizes the risk of electric shock.

TECHNICAL SPECIFICATIONS

  • Supply voltage [V]: AC 230 50Hz
  • Welding methods: MMA, TIG DC
  • Manufacturing technology: MOSFET
  • Welding current [A]: 190
  • Duty cycle [%]: 60
  • Tension without load. [V]: 20 (VRD) / 70
  • Max. current consumption [A]: 39
  • Max. power consumption [kVA]: 9
  • Welding current control: Smooth
  • Weight [kg]: 10.5
  • Dimensions (L x W x H) [mm]: 465 x 295 x 360

WORK CYCLE

The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation of the device, a 4-minute break is required. 100% duty cycle means that the device can work continuously without interruption.

LEVEL OF SECURITY

The IP determines the degree to which the device is resistant to solid and water contamination entering the device. IP21S means that the device is suitable for operation in confined spaces and is not suitable for use in rain and snow.

HOT START FUNCTION

The HOT START function is commonly known as hot start. It works when the arc is struck, causing the welding current to temporarily increase above the value set by the welder. HOT START is designed to prevent the electrode from sticking to the material and is a great help when starting the arc.

ANTI STICK FUNCTION

The ANTI STICK function is a short-circuit protection that reduces the welding current in case the electrode sticks to the workpiece. This makes it easier to detach and protects the device against damage.

VRD FUNCTION

Module reducing the idle voltage of the device's secondary circuit. Increases safety and reduces the risk of electric shock. The function turns the welding power off and on when the resistance between the electrode tips - welded element is measured during welding.

TIG DC LIFT WELDING

Welding with a tungsten electrode in an inert gas shield using a torch with a gas valve in the handle.

The arc is struck by rubbing, similar to the MMA ignition method.

The use of this method allows welding of all types of steel, i.e. carbon, alloy, stainless, acid-resistant steel, as well as copper alloys, e.g. bronze or brass.

WARNING! The TIG torch is not a standard kit accessory. You can buy such a handle in our store

Product Details
SET3-SINW-MMA200

Data sheet

WELDING CURRENT
190A
POWER SUPPLY
230V
EFFICIENCY
60%
Reviews

Write your review

Sherman DIGITIG 206P AC/DC Inverter welder

Sherman DIGITIG 206P AC/DC Inverter welder

Write your review
You might also like

Reference: PSP04

Brand: SHERMAN

Sherman V1a Welding helmet

Review(s): 0

Catalog number: PSP04 Darkness range: 9 -13 DIN Switching time - light / dark [s]: 1/30000 Switching time - dark / bright [s]: 0.25 - 0.8 (stepwise) Sensitivity adjustment: Smooth Welding / grinding: YES / YES Number of photo sensors: 2 Field of view [mm]: 95 x 36 UV / IR16 protection according to DIN Darkness in the light state: 4 according to DIN Filter...

Price €36.99
In stock
8 other products in the same category:

Follow us on Facebook