- PLASMA CUTTERS
- WELDING CARTS
- WELDING MASKS
- WELDING TORCHES
- GAS EQUIPMENT
- WELDING ACCESSORIES
- SPARE PARTS
- HEALTH AND SAFETY
- ABRASIVE MATERIALS
- CORDLESS TOOLS
- Weld bead cleaners
- WELDING GAUGES
Cylinder filled with Argon / CO2 mixture with 200bar pressure reducer.
Sherman MIG 320Y/4R - welding kit no.11
SHERMAN MIG 320Y / 4R WELDING MACHINE - WELDING KIT # 11
| Brand : Sherman | Welding methods: MIG / MAG, MMA | Power supply: 400V | Welding current: 320A | Efficiency: 60% |
- MIG 320Y / 4R welder
- Welding holder TW-36 / 4m
- Mass cable
- User manual
- Warranty Card
- Vogelmann Gas bottle MIX Ar / CO2 8l 150bar
- Vogelmann Profi Gas regulator
- Vogelmann Stark Welding helmet
- Vogelmann anti-spatter spray 400ml
- Vogelmann A set of 39 elements MB-36
- ESAB Heavy Duty Welding Gloves
- Vogelmann welding wire SG2 0.8mm 15kg
- Sherman Angle Set (3 pcs)
- Snake - 3m
- Zip tie 6-10mm - 2 pcs
MIG 320Y SEMI-AUTOMATIC WELDING MACHINE
It is used for manual welding of steel and non-ferrous metals in protective gas. The latest technological achievements were used in the design and construction of devices.
The device allows for welding with the following methods:
- MIG / MAG
The device is equipped with a professional 4-roll wire feeder, has a smooth adjustment of the welding current and wire feed speed. The easy and quick way to change the welding voltage polarity allows you to weld with self-shielding wire without the use of protective gas.
The welder is equipped with welding current and voltage displays, 2T / 4T switch and inductance adjustment useful when welding thin sheets. It enables welding with welding wires with a diameter of 0.8 - 1.6 mm.
The welding machines are used in closed or roofed rooms, not exposed to direct weather conditions.
- Power supply: 3x400V 50Hz
- Power consumption [kVA]: 10.2
- Security [A]: 16
- Welding current range [A]: 50-320
- Rated welding current: 320A / 60%
- Current regulation: smooth
- Wire diameter [mm]: 0.8; 1.0; 1.2;
- Number of rolls: 4 rolls
- Wire feed speed [m / min]: 1.5–19
- Protection degree: IP21
- Spool weight [kg] 5; 15
- Dimensions [mm]: 760x375x730
- Weight [kg]: 50
Modern technology based on bipolar transistors with an insulated gate. It combines the ease of control of field effect transistors with a high breakdown voltage and the switching speed of bipolar transistors. The use of IGBT technology significantly extends the reliable operation of welding equipment.
Pulse width modulation occurs in the conduction state, when a small voltage drop on the control system, in relation to the transmitted power, results in the greatest energy efficiency of the control system.
LEVEL OF SECURITY
The IP defines the degree to which the device is resistant to the ingress of solid and water contaminants. IP21 means that the device is adapted to work in closed rooms.
PROTECTION AGAINST OVERHEATING
The IGBT module is protected against overheating by a protective system that switches off the machine's welding circuit. After a few minutes, the welding machine cools down to a temperature that allows it to be switched on again automatically.
EASY TO USE, CLEAR CONTROL PANEL:
The easy-to-use control panel enables precise and smooth adjustment of parameters. The digital display shows the actual current during welding.
Standard connection of welding torches, which enables the connection of various types of torches (e.g. prepared for Aluminum welding or Braze welding by replacing the Teflon insert and contact tip)
REVERSING POLARITY - WELDING WITHOUT GAS
Due to the variable polarity, it is possible to weld with the FLUX method with flux-cored wire without shielding gas. The wire is filled with a flux that produces protective gases during welding.
2T / 4T
2T - Pressing the gun trigger button will cause gas to pre-flow, then strike the arc and start welding. When the button is released, the arc will be extinguished and gas will flow out.
4T - Pressing and releasing the welding gun button will cause gas to pre-flow, then strike the arc and start welding. When the button is pressed and released again, the arc will be extinguished and the gas will flow out.
4 ROLL WIRE FEED
Professional feeder made of die-cast aluminum, has a powerful motor that allows for stable wire feeding without jamming. It is equipped with 4 drive rollers.
It is designed for heavy duty work and longer handles than plastic feeders that cannot handle 4 or 5 meter handles.
The duty cycle is based on a 10-minute period. 60% duty cycle means that after 6 minutes of operation, a 4-minute break is required. Duty cycle of 100% means that the device can work continuously without interruption.
REGULATION OF INDUCTION
It enables optimization of the arc characteristics depending on the thickness of the welded element as well as the welding method and conditions. The function is useful during MIG / MAG welding of thin elements, preventing them from burning out and brazing of galvanized elements.
The chassis for a gas cylinder and road wheels are a huge advantage of this device, it allows you to easily transport the welder with all the accessories.
The device has a fan cooling system, which significantly increases its efficiency.
Reference: SET7-104 302